How Do Solar Sun Rings Work?
At night the contained air acts as an insulating blanket to
retain heat gained during daylight.
Solar Sun Rings are equipped with six magnets to improve
clarity and decrease hardness of the water in your pool. The
magnets are positioned to facilitate rafting. The strength
of the magnets will permit single position removal but will
easily separate to prevent entrapment in accidental falls.
The sun rings now include water anchors which are additional
segmented overlapping channel of vinyl below the outer ring.
The channel is self filling once the sun ring is placed on
the pool and is also self emptying when removed from the pool.
However, in strong winds the horizontal lifting closes the
overlapping segments retaining the water for weight and stability.
Solar Sun Rings were designed to be compatible with automatic
pool cleaners. In the event the suction hose catches on a
ring, the ring will separate from the raft to allow the pool
cleaner to continue.
Neither water nor pool chemicals can evaporate through the
Solar Sun Rings two layers of heavy weight vinyl. You will
save water and chemicals about equal to the percentage of
the surface of your pool covered.
Once the water in your pool has reached adequate temperature,
Solar Sun Rings may be turned over to conserve water by limiting
evaporation without significantly heating the water.
Please Note: For those living in high wind areas,
these Sun Rings will blow off your pool!
|
